FD2175 | Allen Bradley Series C F Frame

Eaton Cutler-Hammer FD2175

Image Coming Soon

DO Supply, Inc. sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with DO Supply, Inc. and not the manufacturer. DO Supply, Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. Read more

Some of the products sold by DO Supply, Inc. may come with firmware installed on them. DO Supply, Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. DO Supply, Inc. makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, DO Supply, Inc. does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by DO Supply, Inc. requires software for operation, you acknowledge that DO Supply, Inc. does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less

Basic Details

MPN	FD2175
Product Line	Series C F Frame
Manufacturer	Eaton Cutler-Hammer

DO Supply is NOT an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Product Description

The FD2175 is a Variable Voltage Drive by Allen-Bradley.

Fast Worldwide Delivery

We offer international delivery through FedEx, UPS, and DHL.

One-Year Warranty

We are proud to offer a one-year DO Supply Warranty with all purchases.

Payment Methods

We are happy to accept payment through all major credit card providers.

Technical Specifications

Frame	F
Interrupting Capacity	3 lb
Part Number/Catalog No.	FD2175
Pole(s)	2
Product Type	Molded Case Circuit Breaker

Series	C
Trip Amps	35 kA @ 277V
Trip Unit	2.75 x 6 x 3.38 in.
Weight	Thermal-Magnetic

About the FD2175

The Eaton Cutler-Hammer FD2175 Circuit Breaker is a Series C, Frame F, Molded Case circuit breaker with a non-interchangeable trip unit designed for providing users devices (motor and motor starter) with complete protection against current short-circuit and overloads. This device consists of 3 main components, a non-interchangeable trip unit made of a thermal-magnetic trip element, a trip-free operating mechanism which provides means of operating the circuit breaker contacts, and an extinguishing arc which confine the arc drawn between breaker contacts. The FD2175 has 175 Amps rated continuous current rating, and it is suitable for 500 Volt AC ground and unground system. It has a maximum interrupting rating of 35 KAIC at 480 Volt AC, and it comes with a 2-pole wiring, which can be used in a single-phase system. It is suitable for reverse feed wiring, and it only has load lone terminals, which provides simple and fasting wiring.

The FD2175 is designed to protect conductors and connected devices from overload and short-circuit, and it has a factory designed trip unit, which is closed to any further adjustment from users. The circuit is designed to provide both thermal and magnetic trip action using bimetal metal material and electromagnet connected in series, and with load, and this connection together provided a very cheap and fast acting trip action. It has a rated 40 degree Celsius operating limit and is used in an environment with non-condensing relative humidity range within 0 to 95%. The FD2175 weighs approximately 1.4 Kilogram, with a total mounting dimension of 70 x 152.4 x 86 millimeters, and it is designed to meet, IEC, AS, UL, BS, and SEV standards.

Common Misspellings

Manufacturer Part Numbers (MPNs) are often difficult to read. Here are some commonly mistaken versions for the FD2175:

FD217S

FD2I75

FD2I7S

DO Supply sells used surplus products. DO Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by DO Supply come with DO Supply’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.