Eaton Cutler-Hammer CRD320T106W

Image Coming Soon

DO Supply, Inc. sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with DO Supply, Inc. and not the manufacturer. DO Supply, Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. Read more

DO Supply, Inc. sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with DO Supply, Inc. and not the manufacturer. DO Supply, Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products.

Some of the products sold by DO Supply, Inc. may come with firmware installed on them. DO Supply, Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. DO Supply, Inc. makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, DO Supply, Inc. does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by DO Supply, Inc. requires software for operation, you acknowledge that DO Supply, Inc. does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less

Basic Details

MPN CRD320T106W
Product Line Series C R Frame
Manufacturer Eaton Cutler-Hammer
security
DO Supply is NOT an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Product Description

The CRD320T106W is a drive. This unit also has an amperage rating of 2000 amps.

travel_explore

Fast Worldwide Delivery

We offer international delivery through FedEx, UPS, and DHL.

security

One-Year Warranty

We are proud to offer a one-year DO Supply Warranty with all purchases.

payment

Payment Methods

We are happy to accept payment through all major credit card providers.

Technical Specifications

Amps 2000 Amps
Dimensions (W x H x D) 15.5 x 16 x 9.75 inches
Frame R
Interrupting Capacity 125 kAIC at 240 Volts AC
Part Number/Catalog No. CRD320T106W
Poles 3
Product Type Molded Case Circuit Breaker
Series C
Trip Type LSIG 1050
Unit Type Digitrip OPTIM

About the CRD320T106W

The CRD320T106W is an electric circuit breaker from Eaton. It is from the C Series of circuit breakers manufactured by Eaton for industrial applications. The module has a maximum current rating of 200 Amps and the interrupt rating of the device is 125 kAIC at 240 Volts AC and 65 kAIC at 480 Volts DC. The CRD320T106W has 3 poles and the maximum voltage rating of the device is 600 Volts AC. The tip type of the unit is the electronic LSIG type and the circuit breaker type is the CRD type. It has an R Frame identification and it comes without any terminals. To install the device, the users must first make sure that the device is not damaged and that there are no visible defects.

The users should remove the screws and the covers and then install the mount trip plug and the accessories in the frame. Then they should reinstall the covers and tighten the screws with the recommended torque of 24 pounds on an inch and mount the terminals back into position. Make sure there is no voltage present on the conducting wires when installing the CRD320T106W circuit breaker, because there may be a chance of electric shock which may be dangerous. Then connect the load and the line conductors after confirming that voltage is not present. Make sure the CRD320T106W circuit breaker is mounted correctly and the wires are secured in place before turning on the power supply to the device. Users should perform the relevant field tests according to the NEMA standards in publication AB4-1990 before handing over the equipment to the customer.

Common Misspellings

Manufacturer Part Numbers (MPNs) are often difficult to read. Here are some commonly mistaken versions for the CRD320T106W:

  • CRD320T10GW
  • CRD320T1O6W
  • CRD320T1OGW
  • CRD320TI06W
  • CRD320TI0GW
  • CRD320TIO6W
  • CRD320TIOGW
  • CRD32OT106W
  • CRD32OT10GW
  • CRD32OT1O6W
  • CRD32OT1OGW
  • CRD32OTI06W
  • CRD32OTI0GW
  • CRD32OTIO6W
  • CRD32OTIOGW
typing